2010年已发表论文  

Min J, Lin J, Li J, et al. Investigation on hot forming limits of high strength steel 22MnB5[J]. Computational Materials Science, 2010, 49(2): 326-332.  

Tao X Y, Lin J P, Chen S S. Sensitivity Analysis on Effect of Parent Materials Parameter on Formability of Tailor Welded Blank[C]//Applied Mechanics and Materials. Trans Tech Publications, 2010, 26: 1177-1183.  

Min J, Lin J, Cao Y, et al. Effect of necking types of sheet metal on the left-hand side of forming limit diagram[J]. Journal of Materials Processing Technology, 2010, 210(8): 1070-1075.  

Min J, Lin J, Tian H, et al. Investigation on uniaxial tensile instability of USIBOR1500 steel sheets at elevated temperature[J]. Chinese Journal of Mechanical Engineering, 2010 (1): 94.  

Lin J, Min J, Xu Z, et al. Tool design and process tests of hot stamping for advanced high strength steels[C]//Mechanic Automation and Control Engineering (MACE), 2010 International Conference on. IEEE, 2010: 5362-5365.  

王立影, 林建平, 王芝斌. 超高强度钢热变形方程[J]. 塑性工程学报, 2010, 17(1): 88-92.  

Chen K, Lin J P, Lv M K, et al. Advanced High Strength Steel Sheet Forming and Springback Simulation[C]//Advanced Materials Research. Trans Tech Publications, 2010, 97: 200-203.  

Lv M, Lin J, Chen K, et al. Effect of hardening rule on springback prediction for an open-channel shaped part of dp600 steel[C]//Mechanic Automation and Control Engineering (MACE), 2010 International Conference on. IEEE, 2010: 5306-5309.  

Hu Q S, Lin J P, Xing D Y, et al. The Influence of Integrated Strength on Bulging Cracking of Tailor Welded Blanks[C]//Advanced Materials Research. Trans Tech Publications, 2010, 97: 195-199.  

Tian H B, Liu X H, Lin J P, et al. Investigation on the formability of tailor welded blanks with curved seams[C]//Advanced Materials Research. Trans Tech Publications, 2010, 83: 1160-1164.  

Tian H B, Liu X H, Lin J P. Investigation on the formability of tailor-welded blanks[C]//Advanced Materials Research. Trans Tech Publications, 2010, 97: 260-263.  

林建平, 邢丹英, 胡巧声, 等. 焊缝对拼焊板纵向拉伸成形性能的影响规律[J]. 同济大学学报 (自然科学版), 2010, 38(9): 1350-1353+ 1380.  

陈水生, 林建平, 辛立久. 拼焊板焊缝方向对其单向拉伸性能的影响研究[J]. 材料科学与工艺, 2010 (4): 480-485.  

Ouyang W P, Lin J P, Lu Z G. Research of stress transfer area and its length prediction of single-lap adhesive joint[C]//Advanced Materials Research. Trans Tech Publications, 2010, 129: 680-685.  

林建平, 卢志国, 杨纥. 封闭条件下胶接单搭接头固化过程的实验与数值模拟[J]. 高分子材料科学与工程, 2010, 26(9): 96-99.  

Lu Z, Lin J, Wu S, et al. Whole Field Bonded Steel Tensile Test Using Digital Image Correlation System[R]. SAE Technical Paper, 2010.  

黄风立, 林建平, 许锦泓, 等. 基于移动最小二乘的注塑模浇注系统稳健设计[J]. 高分子材料科学与工程, 2010, 26(5): 166-170.  

张广冬, 郝昕玉, 林建平. 类 U 形挤出模具优化设计[J]. 塑料, 2010 (6): 8-10.  

应之丁, 朱建安, 林建平. 快速重载货物列车踏面制动试验与分析[J]. 同濟大學學報 (自然科學版), 2010, 38(9): 1363-1366+ 1396.

应之丁, 李小宁, 林建平, 等. 列车车轮踏面制动温度循环试验与温度场仿真分析[J]. 中国铁道科学, 2010, 31(3): 70-75.