2011年已发表论文  

Shui-sheng C, Jian-ping L, Jing L, et al. Analytical models for the design of high strength steel Tailor welded blanks[J]. Journal of Iron and Steel Research International, 2011, 18: 646-651.  

Chen S S, Lin J P, Liu J. Effect of the Thickness Ratio on the Failure Modes of Tailor Welded Blanks[C]//Advanced Materials Research. Trans Tech Publications, 2011, 189: 2965-2969.  

Hu Q S, Ni F, Lin J P. Strain Analysis on Weld Zone of Tailor Welded Blanks in the Case of Welded Seam Cracking[C]//Advanced Materials Research. Trans Tech Publications, 2011, 154: 355-358.  

胡巧声, 倪锋, 林建平. 拼焊板成形极限图特征研究[J]. 中国机械工程, 2011, 22(10): 1232-1235.  

孙东继, 林建平, 邢丹英, 等. 拼焊板母材性能参数与其板厚匹配关系研究[J]. 系统仿真学报, 2011, 23(6): 1113-1118.  

Min J, Lin J, Li J. Effect of deformation temperature on the microstructure of boron steel 22MnB5[J]. Advanced Science Letters, 2011, 4(3): 938-942.  

MIN J, LIN J, XIN L, et al. The Effect of Pre—Deformation at Elevated Temperatures on the Microstructure and Hardness of Boron Steel 22MnB5 [J]. Journal of Iron and Steel Research, 2011: S1.  

Xin J, Min Y, Lin P, et al. Investigation on the failure mechanism of DP590-22MnB5 (quenched) and DP590–DP590 spot-welding joints[J]. J Iron Steel Res Int, 2011, 18: 936-940.  

林建平, 孔庆华, 徐洲, 等. 22MnB5 钢板不等温拉深成形的影响因素研究[J]. 同济大学学报 (自然科学版), 2011.  

Lin J. Investigation on dynamic recovery behavior of boron steel 22MnB5 under austenite state at elevated temperatures[J]. SAE International Journal of Materials and Manufacturing, 2011, 4(2011-01-1057): 1147-1154.  

Min J Y, Lin J P, Xin L J, et al. Indirect Hot Stamping of Boron Steel 22MnB5 for an upper B-pillar[C]//Advanced Materials Research. Trans Tech Publications, 2011, 314: 703-708.  

Li J Y, Min J Y, Qin K Y, et al. Investigation on the effects of sheet thickness and deformation temperature on the forming limits of boron steel 22MnB5[C]//Key Engineering Materials. Trans Tech Publications, 2011, 474: 993-997.  

Lin J, Min J, Ye Y, et al. Investigation on the mechanical properties at room Temperature of Q and P steel sheet with ultrahigh strength[J]. Journal of Iron and Steel Research, International, 2011, 18: 1-2.  

Ke C, Jian-ping L, Smith L M, et al. Whole Field Strain Measurement of High Strength Steel Under Plain Strain Condition[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18: 320-324.  

Chen K, Lin J P. Material Modeling and Correlative Mechanical Testing on AHSS Sheet Forming Simulation[C]//Advanced Materials Research. Trans Tech Publications, 2011, 337: 198-202.  

Shi Q Q, Lin J P, Lv M K, et al. Analysis of the influence of reinforcement parameters on springback of U-shape part[C]//Key Engineering Materials. Trans Tech Publications, 2011, 474: 1151-1155.  

Min, J.Y. & Lin, J.P. & Xin, L.J. & Ye, Y & Chen, K & Ding, L. Investigation on the instability process of Q&P steel during uniaxial tensile test using digital image correlation[C]//Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. 778-781.  

Lin J, Lu Z, Yang H, et al. A design of experiments assessment of moisture content in uncured adhesive on static strength of adhesive-bonded galvanized SAE1006 steel[J]. International Journal of Adhesion and Adhesives, 2011, 31(6): 478-485.  

Lu Z, Wang P, Lin J, et al. Effect of moisture content in uncured adhesive on static strength of bonded galvanized DP600 steel joints[J]. International Journal of Adhesion and Adhesives, 2011, 31(4): 202-208.  

Lu Z, Chen C, Lin J, et al. Research on the Initial Failure Site of Weld-Bonded Automobile Aluminum Joint Under Tensile Loading[J]. Advanced Science Letters, 2012, 5(2): 672-675.  

Lu Z G, Lin J P, Hua D D. Finite Element Study on Temperature Distribution of Curing of Fully Enclosed Adhesive Joint[C]//Advanced Materials Research. Trans Tech Publications, 2011, 239: 398-403.  

Zhang B W, Lin J P, Lu Z G. Effect of Welding Parameters on Stress Distribution of Weld-Bonded Joints[C]//Applied Mechanics and Materials. Trans Tech Publications, 2011, 79: 128-133.  

Chen C, Lu Z G, Lin J P. Temperature variation history prediction of fully-closed adhesive joint in curing process[C]//Applied Mechanics and Materials. Trans Tech Publications, 2011, 44: 394-399.  

卢志国, 林建平, 张宝文. 车身铝合金板胶接接头固化度解析预测研究[J]. 材料工程, 2011 (7): 15-19.  

黄风立, 林建平, 钟美鹏, 等. 基于综合关联度的注塑成型工艺参数多目标稳健设计[J]. 高分子材料科学与工程, 2011, 27(3): 162-166.

黄风立, 林建平, 钟美鹏, 等. 注塑成型工艺多目标稳健设计及优化算法[J]. 同濟大學學報 (自然科學版), 2011, 39(2): 287-291+ 298.