2013年已发表论文  

陈水生, 林建平, 王裕清. 车辆激光拼焊板失效模式预测及有限元验证[J]. 农业工程学报, 2013, 29(12): 57-63.  

Min J, Lin J. Yield Point Elongation and Localized Deformation Bands in 22MnB5 Steel at Room Temperature[J]. steel research international, 2013, 84(12): 1216-1222.  

Li Y, Lin J, Guo R. Numerical and experimental analysis on the formability of tailor welded blanks based on digital image correlation[C]//AIP Conference Proceedings. AIP, 2013, 1567(1): 772-775.  

Ding L, Lin J, Min J, et al. Necking of Q&P steel during uniaxial tensile test with the aid of DIC technique[J]. Chinese Journal of Mechanical Engineering, 2013, 26(3): 448-453.  

Min J, Hector L G, Lin J, et al. Analytical method for forming limit diagram prediction with application to a magnesium ZEK100-O alloy[J]. Journal of materials engineering and performance, 2013, 22(11): 3324-3336.  

Zhang L, Lin J, Sun L, et al. A new method for determination of forming limit diagram based on digital image correlation[R]. SAE Technical Paper, 2013.  

Min J, Lin J. Anelastic behavior and phenomenological modeling of Mg ZEK100-O alloy sheet under cyclic tensile loading–unloading[J]. Materials Science and Engineering: A, 2013, 561: 174-182.  

Min J, Lin J, Min Y. Effect of thermo-mechanical process on the microstructure and secondary-deformation behavior of 22MnB5 steels[J]. Journal of Materials Processing Technology, 2013, 213(6): 818-825.  

Lin J, Hua D, Wang P C, et al. Effect of thermal exposure on the strength of adhesive-bonded low carbon steel[J]. International Journal of Adhesion and Adhesives, 2013, 43: 70-80.

Hua D, Lin J, Zhang B. Effects of salt spray on the mechanical properties of aluminum-epoxy adhesive joints[J]. Journal of Adhesion Science and Technology, 2013, 27(14): 1580-1589.