2016年已发表论文  

温媛媛, 林建平, 庞政, 等. Q&P 钢板滞弹性变形行为研究[J]. 塑性工程学报, 2016, 23(6): 131-136.  

Gao X, Min J, Zhang L, et al. Prediction and experimental validation of forming limit curve of a quenched and partitioned steel[J]. Journal of Iron and Steel Research, International, 2016, 23(6): 580-585.  

陈水生, 林建平, 刘景. AA5182-O 铝拼焊板焊缝晶粒尺寸对力学性能的影响[J]. 塑性工程学报, 2016, 23(3): 68-71.  

闵永安, 赵洁璠, 林建平, 等. 22MnB5 钢热变形诱发相变及其对组织性能的影响[J]. 同济大学学报: 自然科学版, 2016, 44(1): 113-118.  

Min J, Seim P, Störkle D, et al. Thermal modeling in electricity assisted incremental sheet forming[J]. International Journal of Material Forming, 2016: 1-11.  

Min J, Hector Jr L G, Zhang L, et al. Plastic instability at elevated temperatures in a TRIP-assisted steel[J]. Materials & Design, 2016, 95: 370-386.  

Min J, Stoughton T B, Carsley J E, et al. Compensation for process-dependent effects in the determination of localized necking limits[J]. International Journal of Mechanical Sciences, 2016, 117: 115-134.  

Min J, Stoughton T B, Carsley J E, et al. Accurate characterization of biaxial stress-strain response of sheet metal from bulge testing[J]. International Journal of Plasticity, 2017, 94: 192-213.  

Min J, Carsley J E, Lin J, et al. A non-quadratic constitutive model under non-associated flow rule of sheet metals with anisotropic hardening: Modeling and experimental validation[J]. International Journal of Mechanical Sciences, 2016, 119: 343-359.  

Min J, Stoughton T B, Carsley J E, et al. A method of detecting the onset of localized necking based on surface geometry measurements[J]. Experimental Mechanics, 2017, 57(4): 521-535.  

Li F, Lin J, Fu M. Study on the constitutive model of boron steel 22MnB5 with different phase fractions[J]. International journal of precision engineering and manufacturing, 2016, 17(10): 1323-1331.  

Min J, Hector L G, Zhang L, et al. Elevated-temperature mechanical stability and transformation behavior of retained austenite in a quenching and partitioning steel[J]. Materials Science and Engineering: A, 2016, 673: 423-429.  

Zhang L, Lin J, Min J, et al. Formability Evaluation of Sheet Metals Based on Global Strain Distribution[J]. Journal of Materials Engineering and Performance, 2016, 25(6): 2296-2306.  

Zhang L, Min J, Wang B, et al. Constitutive model of friction stir weld with consideration of its inhomogeneous mechanical properties[J]. Chinese Journal of Mechanical Engineering, 2016, 29(2): 357-364.  

万庆冕, 林建平. 热成形 B 柱结构研究与优化[J]. 汽车工程学报, 2016, 6(2): 143-149.  

Stoughton T B, Carsley J E, Min J, et al. Advances in characterization of sheet metal forming limits[C]//Journal of Physics: Conference Series. IOP Publishing, 2016, 734(3): 032073.  

Min J, Hector L G, Carsley J E, et al. Spatio-temporal characteristics of plastic instability in AA5182-O during biaxial deformation[J]. Materials & Design, 2015, 83: 786-794.  

Zheng R, Lin J, Wang P C, et al. Correlation between surface characteristics and static strength of adhesive-bonded magnesium AZ31B[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84(5-8): 1661-1670.  

Wu Y, Lin J, Wang P C, et al. Effect of Thermal Exposure on Static and Fatigue Characteristics of Adhesive-bonded Aluminum Alloys[J]. The Journal of Adhesion, 2016, 92(7-9): 722-738.  

Wu Y, Lin J, Carlson B E, et al. Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys[J]. Surface and Coatings Technology, 2016, 304: 340-347.  

Wu Y, Lin J, Wang P C, et al. Effect of long-term neutral salt spray exposure on durability of adhesive-bonded Zr–Ti coated aluminum joint[J]. International Journal of Adhesion and Adhesives, 2016, 64: 97-108.  

Zheng R, Lin J, Wang P C, et al. Effects of a sheet metal stamping lubricant on static strength of adhesive-bonded aluminum alloys[J]. Journal of Adhesion Science and Technology, 2015, 29(13): 1382-1402.  

陈水生, 林建平. 兼顾使用性和成形性的汽车门内板轻量化设计[J]. 机械设计, 2016, 33(8): 53-57.  

林建平. “工业 4.0” 下的模具智能化发展趋势[J]. 模具工业, 2016, 42(5): 1-1.  

王根, 林建平, 孙鑫, 等. 基于最大正应力的自升式平台悬臂梁框架轻量化优化设计[J]. 机械工程学报, 2017, 53(7): 173-179.